[Utility] HiR - HoneySelect item Resolver

[YashiroAmamiya]

Hi!Hello! good evening!

A formal update of honey select was performed for 9/30.
When a person of HiR used applied this, an added H item isn't indicated.

I prepared the version which settles this.

Download:1.1.0
https://mega.nz/#!Z0ZiHBTA!7yAD9ztHoMH7Lv2c-xnUeObKaIsFeGFozsyFbomZiI0

The person who doesn't apply an update for 9/30 use 1.0.4 as before, please.
The person who does apply an update for 9/30 use 1.1.0 please.An added H item is indicated.

Trouble is given! I'm sorry!

Further, it's unrelated to HiR directly, one besides" in illusion\HoneySelect\abdata\studio\list\itemlist\h oney", "00.unity3d/01.unity3d". When unity3d file exists, honey selection causes a defect.
please move that to a different place or delete.

 

[Gurudo99]

Would you, or someone else, be able to explain how exactly to use this?

 

[theonewolf]

Would you, or someone else, be able to explain how exactly to use this?

-INTRODUCTION

HoneySelect item Resolver(HiR) is the program for rebuilding the item list of HoneySelect.
In HoneySelect you have to edit the item list according to its format when you add the Mod items. Items will not be activated by just copying.
HiR will help you activating Mod items by automatically rebuild the item list. All you need is just run HiR.

Since it requires the modding tools, I assume this is a tool to help get your items in order correctly in the itemlist.

 

[cur144]

@Gurudo99
There is the detailed explanation in the downloaded thing.

 

[Gurudo99]

@theonewolf
Yea I knew that much :P I just didn't know how to properly use it is all.

@cur144
I looked at the pictures and read the stuff but I didn't quite understand it. I'm sure it's just me misunderstanding the instructions since the OP's language isn't naturally English.

 

[Gurudo99]

Since it requires the modding tools, I assume this is a tool to help get your items in order correctly in the itemlist.

Yea I know that much :P I just don't know how to use it correctly is all.

 

[Gurudo99]

@Gurudo99
There is the detailed explanation in the downloaded thing.

I looked at the pictures and read the stuff included, I just don't quite understand them. I'm sure it's just me misunderstanding them since the OP's language isn't naturally English.

 

[cur144]

@Gurudo99
There was a request of the video tutorials in the HongFire to Amamiya.
He seems to intend to make it within few days.
Please wait for it.

 

[OniGan]

My pc is too old. It does not support the required version of the NETFramework v.4.5.2 :(

 

[Gurudo99]

Sorry for the triple post, it didn't post my replies the first time :P

 

[cur144]

Amamiya seems to be busy. He tends to do a lot at a time.
I don't know how the video tutorials turned out.

What HiR user must do is simple.
1.At first all Illusion official patches must be installed beforehand when use the HiRv1.1.0

2.Download SB3UGS and put to somewhere in the your PC.

SB3UGS uses V1.0.54delta (I recommend this thing)
http://www.megafileupload.com/bsbP/SB3UGS_v1.0.54delta.7z

3.Install the Item Mod

4.Execute the HiR
4-a.Set the abdata path & SB3U path
4-b.Then push a "start"
(wait for a while)
If a "[info] finish!" is output, it is completion.

 

[Gurudo99]

Thanks for the heads up. I did exactly what you said but I never knew if I was using it correctly. Thanks for clearing things up!

 

[Marie Rose]

in my PC the new HiR version 1.1.0 It is recognized as malwere "Heur.Adv.ML.C"

I tried to re-download it again, but every time I open the rar archive, the "honeyselectitemresolver.exe file is removed from the PC by Norton

 

[YashiroAmamiya]

@ Marie Rose

Hello!
I'm sorry to cause trouble!

HiR is the open source software which achieves the specification of the studio item, and source code is exhibited .
http://www.mediafire.com/file/9iymc9jvz8it0st/HoneyselectItemResolver1.1.0.src.rar

Only 1 purpose of this tool is a renewal of 00.unity3.
This makes a backup. This makes a script file. But this isn't doing other things.
There are no codes which harm your computer.

Because this reads a list file and adds it to the 00.unity3d.
Mr. Norton seems to have judged to be similar to movement of a Trojan horse.

If you believe this, please consider Mr. Norton's setting change.

 

[cur144]

(This is the same as the contents which I posted to HF)

The Christmas tree of the item is added to December 22/2016 in official DLC.
Probably, I think list file(02.unity3d) is added.
However, can't use it immediately until updating the HiR.
Because, Amamiya intends to cope, please wait a little.

 

[foxxyswords]

Try not to use this after applying Illusion's 12/22 update, I broke it now I need to hunt down the backups.

If you messed up like me and tried applying HiR you can fix it by...
From the "Personality addition pack - Active" the ISO from the new update browse to:

D:\copy\setup\abdata\studio\list\itemlist\honey

copy and paste that into your Illusion directory

C:\Illusion\HoneySelect\abdata\studio\list\itemlist\honey

Spoiler: If you see this message you need to revert to backup or follow step above

 

[cur144]

[About matter of the #15]

Amamiya seemed to forget a notice to here. lol

HiR was updated. Please use this. (HiR V1.1.1)
http://www.hongfire.com/forum/forum...-append-additional-data?p=5748087#post5748087

 

[flashk1ll]

This is what I'm getting using Honey Select v1.11 & SB3UGS v1.5.22.7

 

[Ram-0-Ram]

This is what I'm getting using Honey Select v1.11 & SB3UGS v1.5.22.7

You need SB3UGS 1.054 Delta. Also it is written right in-front of you. Required SB3U 1..54-1.1.0

 

[flashk1ll]

so wierd it was working with SB3UGS 1.3 or 1.4X? can't remember. thx got it workign but missing list file?

 

[Ram-0-Ram]

so wierd it was working with SB3UGS 1.3 or 1.4X? can't remember. thx got it workign but missing list file?

I don't know the reason of missing file. Did you update the game after December patch? Because the HiR version 1.1.1 runs with the latest update.

Check the honey folder located in itemlist folder inside list of studio folder ()
Look if there is 01, 02 and 03 files are there along with 00. If not then
Check that if the file list located in itemlist folder of studio. And copy paste list file 01,02 and 03 inside the honey folder

 

[navmesh]

hello, i have a problem with HIR 1.1.1 ,although it says "finished" and no errors logs but when i try there are many problems with the studio ,when i load the scene in studio, the scene can not be loaded and i have to click on "cancel" button ,when i close the loading screen ,i see
the character loaded but in T-poses
whenever i spawn a character their name doesn't show up in the tab (exactly like the problem described here
http://www.hongfire.com/forum/forum...-append-additional-data?p=5778368#post5778368
(but i'm already using HIR 1.1.1)
when i restore the backup, it works fine again

the reason because i make a copy of "list" folder (\abdata\studio\list) after removing it ,everything works fine now
Big thanks to cur144 for the help

 

[Silfazaris]

the reason because i make a copy of "list" folder (\abdata\studio\list) after removing it ,everything works fine now
Big thanks to cur144 for the help

Edit Post: I was having the issue other people had "characters' tab not showing so you couldn't edit their positions or whatever. Also scenes not loading"

I figured out what to do. To help those with the same problem:

1- Just download the lastest update. Delete your entire abdata/studio folder from your game directory and grab the abdata/studio folder from the update and put there. You can check now your studio and it will show characters' tab and it will load scenes again.

2- Then you just get the maps you want from this topic and install them.

3- Then, after you installed the maps, you run HiR again. It worked for me!

Of course you need the lastest update AND HiR 1.1.1 and the SB3UGS whatever Delta.

 

[Tinala]

I followed the guide closely but still get an error for "Could not find file under abdata\itemlist\honey\itemList_Honey_00_Sheet2.MonoBehaviour." When I try to run it.

No clue what i've done wrong or how to fix it.

https://i.gyazo.com/bd59ee12f521a3ed1ddb00eb604e2ac0.png

Please help.

 

[cur144]

@Tinala
Please try a ”HiR Clear Execute”
http://www.hongfire.com/forum/forum...-append-additional-data?p=5772766#post5772766