[Utility] HiR - HoneySelect item Resolver

[Tinala]

@cur144
That worked! Thank you! <3

 

[smoothlaunch]

I found a mod in a japanese site.
it is made for Neo ..But somehow HIR can not process them..
Items are in this format below...

<13241><37><Tentacle A Winding large><><studioneo/@@tosiS_NEO@@/@NEO@syokusyu@@.unity3d><p_item_syokusyuA1><j_S_ana_00><False><True><o_S_ana><False><><True>

I checked the paths and the they are are correct...

What is HIR id <37> and why it does not work ..? Anyone has an idea ?

 

[cur144]

@smoothlaunch
Please install it by the HiR_Neo V1.1.0 with "category advance" function.
http://www.anime-sharing.com/forum/...tility-hir_neo-605278/index4.html#post2716397

It is an item for studio neo and not usable in the old studio.
However, its author did one mistake.
Its category number shouldn't make 37, correct number is 8.
Therefore, user have to use the "category advance" by all means.

 

[smoothlaunch]

Thank you very much cur144.. :) I was struggling with it.

UPDATE...
Hello cur144..
I changed all order category numbers to <8>
Now they appeared on "[M]H Items "..
But here is the problem ..
"These buttons not creating anything ... Objects listed but not nothing appears either on list or stage If I click them .."
Any ideas Cur144 ?

Source of mod here on this page : [ http://futalog.com/486906990.htm ]

 

[cur144]

@smoothlaunch
Because, I can't understand where you have a problem with, I write all the procedures.

1.Editing of @@syokusyu@[email protected]
Change the category number from 37 to 8.
However, 37 is all right too, if you use the "category advance".

Spoiler:

2.Start the HiR_Neo(V1.1.0) with "category advance".
Confirm that HiR_Neo doesn't have an error.

3.Confirm its items is added under the [M]H Items category on studio neo.
If there is not added, please do the following.

http://www.hongfire.com/forum/forum...-append-additional-data?p=5792138#post5792138

4.Push the button of the added items, and confirm whether an item's object is added.
If nothing appears, probably following was not installed.

abdata\studioneo\@@tosiS_NEO@@\@NEO@syokusyu@@.unity3d

 

[smoothlaunch]

ok everything is as it should be cur.

I have all installations working fine previously released battle DLC. ,
I did not install any DLC after party's first RELEASE.


1) Changed category to 8, translated the names for myself.. So HIR list is :

<13241><8><Tentacle A Winding large><><studioneo/@@tosiS_NEO@@/@NEO@syokusyu@@.unity3d><p_item_syokusyuA1><j_S_ana_00><False><True><o_S_ana><False><><True>
<13242><8><Tentacle A Winding small><><studioneo/@@tosiS_NEO@@/@NEO@syokusyu@@.unity3d><p_item_syokusyuA2><j_S_ana_00><False><True><o_S_ana><False><><True>
<13243><8><Tentacle A Normal><><studioneo/@@tosiS_NEO@@/@NEO@syokusyu@@.unity3d><p_item_syokusyuA3><j_S_ana_00><False><True><o_S_ana><False><><True>
<13244><8><Tentacle A ejaculation><><studioneo/@@tosiS_NEO@@/@NEO@syokusyu@@.unity3d><p_item_syokusyuA4><j_S_ana_00><False><True><o_S_ana><False><><True>
<13245><8><Tentacle B Ueneune><><studioneo/@@tosiS_NEO@@/@NEO@syokusyu@@.unity3d><p_item_syokusyuB1><j_S_kokan_00><False><True><o_S_kokan/o_S_mouth><False><><True>
<13246><8><Tentacle B round><><studioneo/@@tosiS_NEO@@/@NEO@syokusyu@@.unity3d><p_item_syokusyuB2><j_S_kokan_00><False><True><o_S_kokan/o_S_mouth><False><><True>
<13247><8><Tentacle B Normal><><studioneo/@@tosiS_NEO@@/@NEO@syokusyu@@.unity3d><p_item_syokusyuB3><j_S_kokan_00><False><True><o_S_kokan/o_S_mouth><False><><True>
....... so on...

2) I run HIR using "the category advanced" function .. All items listed in [M]H Items category ..I see them ..

3) "abdata\studioneo\@@tosiS_NEO@@\@NEO@syokusyu@@.unity3d" file is there ....Where it should be ..

But nothing appears on studio if i click the buttons of items...

NO Errors In : HIR 1.1 Neo as well..

In time maybe i can find what is the problem .Thank you Cur144.

 

[cur144]

Problems are not found in #31 in particular.
I was able to add its Mod by the its method.

About DLC, I recommend installation all them except the latest DLC(6/2/2017).
(And I installed a battle arena)
Latest DLC has the bug that character size changes in FK.
I waiting for the repair patch from an official to be released.

(Edit)
The repair patch was released today.

 

[Mr.Li]

For some reason this isnt working on my end. And I'm talking about the most basic part btw. So I've run HIR neo to my abdata folder, and copy/pasted all the items from studio vanilla's honeyselectitemresolver folder to the studio neo one, and the items are still not showing up in studio neo... I just know I'm doing something wrong but I dont know what... please help?

 

[smoothlaunch]

It worked for me finally:
BUT the problem was FILES WERE DAMAGED ..
I first time had such an issue..
I replace files (unity files) and it worked ...
BUT i have another stranger issue now .
They are like glowing pipes .. Not like they were shown on presentation image.. Weird.


how upload image

 

[cur144]

@Mr.Li
>and copy/pasted all the items from studio vanilla's honeyselectitemresolver folder to the studio neo one,
It is not necessary.

1.Please put an item list for old studio under the abdata\studio\itemobj\honey\HoneyselectItemResolver
It is a thing of such a format.

<><><8052><2><Ferrari F2001><studio/itemobj/honey/_yashiroAmamiya_car1.unity3d><p_item_08>


2.And Please put an item list for studio neo under the abdata\studioneo\HoneyselectItemResolver
It is a thing of such a format.

<8815><8><Vibe (Motion)><><studio/itemobj/honey/Cur_Hitem.unity3d><p_vibe><><True><False><><False><><True>

HiR_Neo handles 1. and 2. automatically for studio neo.
(HiR for old studio handles only 1. )


@smoothlaunch
Item of studio neo has the thing which is possible to color and speculum change.
As for such item, it is name is displayed with red or blue.
(red=One color change is possible, blue=Two color change is possible)
(However, installation of DLC is necessary)
In such a thing, please choose an anim after choosing the item in the work space.

 

[smoothlaunch]

@smoothlaunch
Item of studio neo has the thing which is possible to color and speculum change.
As for such item, it is name is displayed with red or blue.
(red=One color change is possible, blue=Two color change is possible)
(However, installation of DLC is necessary)
In such a thing, please choose an anim after choosing the item in the work space.

cur144 ..Yes they listed in red color . yes i Have DLCs installed..
And i could not give a meaning why they look red .. :)
So everything is fine it seems ..
Thank you :)

 

[Mr.Li]

@Mr.Li
>and copy/pasted all the items from studio vanilla's honeyselectitemresolver folder to the studio neo one,
It is not necessary.

1.Please put an item list for old studio under the abdata\studio\itemobj\honey\HoneyselectItemResolver
It is a thing of such a format.

<><><8052><2><Ferrari F2001><studio/itemobj/honey/_yashiroAmamiya_car1.unity3d><p_item_08>


2.And Please put an item list for studio neo under the abdata\studioneo\HoneyselectItemResolver
It is a thing of such a format.

<8815><8><Vibe (Motion)><><studio/itemobj/honey/Cur_Hitem.unity3d><p_vibe><><True><False><><False><><True>

HiR_Neo handles 1. and 2. automatically for studio neo.
(HiR for old studio handles only 1. )

Thanks for the reply cur144. With your instructions I finally got them working! so thank you verry much. And of course, thank you too yashiroamamiya for this mod as well! With this mod the possibilities are literally limitless.

 

[cur144]

@Mr.Li
Open all text by text editor, and please check it.
Do it in all texts under the following folders.

abdata\studioneo\HoneyselectItemResolver
abdata\studio\itemobj\honey\HoneyselectItemResolver

Is the last of each line <True> or <False>?

If it is so, please put the text to the abdata\studioneo\HoneyselectItemResolver
It must move the file, not a copy.

If it is not so, please put the text to the abdata\studio\itemobj\honey\HoneyselectItemResolver
It must move the file, not a copy.

HiR & HiR_neo outputs an error if there is the different format file.

 

[FutaBoy]

I have a problem with it. After by using HiR and starting the Studio, I have no girls and guys in my list.

 

[cur144]

@FutaBoy
As for the probable cause, the game version is old or this.
http://www.hongfire.com/forum/forum...-append-additional-data?p=5745948#post5745948

When the game version is old, please install all DLC, then execute the "HiR Clear Execute".
http://www.hongfire.com/forum/forum...-append-additional-data?p=5772766#post5772766

(Edit)
Or there is possibility using old HiR.
The latest HiR is #17.

 

[FutaBoy]

Hmm.... I think it has something to do with some files from Plasticmind, cause I want to use some 4k textures, which I made.

By putting these folders, I got this error.
HoneySelect_32_Data
HoneySelect_64_Data
HoneyStudio_32_Data
HoneyStudio_64_Data

My version from this game is v1.20
I only need the file, which is make it possible to use 4k textures.

Btw, what I can do to fix that breast issue in the studio, when I want to move them manually?
They would be streched in a weird way.

 

[cur144]

I cannot understand the relations of 4K textures mod and the item very well.
HiR only makes the items list as abdata\studio\list\itemlist\honey\00.unity3d
from abdata\studio\itemobj\honey\HoneyselectItemResolver.

If you want to uninstall a problem item from studio...
Check the text file under the abdata\studio\itemobj\honey\HoneyselectItemResolver,
then please delete the file of problem item.
Then execute the "HiR Clear Execute"
http://www.hongfire.com/forum/forum...-append-additional-data?p=5772766#post5772766

 

[smoothlaunch]

Yesterday after making a backup ; first time i installed 4K texture system ...
You should install all components here on this page below in order to successfully use 4K system Futaboy..

4K Textures Installation
IT Really worked for me.. My Game installed up to and included 5/26 DLC.

1. Make sure you have installed HoneySelect Party, any version after 2017/04/28 should be Okay;
2. install SBX2 uncensor;
3. install HSParty Graphic Patch;
4. install 4K texture pack OR HS linear rendering experiment;

 

[FutaBoy]

I made an clean install from my game and the studio is now working with the girls and items. But I have no 4k textures with the old studio, what is strange, cause in the past I got it to work, with the Party addon.
Only the game and that Studio NEO is now working.
Looks like I have to ask Plasticmind, if what is wrong with the studio.

But have still someone an idea how to solve that weird breats bug with the old studio?

 

[Mr.Li]

@Mr.Li
Open all text by text editor, and please check it.
Do it in all texts under the following folders.

abdata\studioneo\HoneyselectItemResolver
abdata\studio\itemobj\honey\HoneyselectItemResolver

Is the last of each line <True> or <False>?

If it is so, please put the text to the abdata\studioneo\HoneyselectItemResolver
It must move the file, not a copy.

If it is not so, please put the text to the abdata\studio\itemobj\honey\HoneyselectItemResolver
It must move the file, not a copy.

HiR & HiR_neo outputs an error if there is the different format file.

There were no <true? or <False> at the end of each items in the .txt files. But I got them working now and the items appear in neo just fine. So Thanks for the help cur144, you're a lifesaver! I was really wacking my brain with this one.

 

[cur144]

@FutaBoy, I talk just in case.
When execute HiR even once, the item's list files become as follows.

Under an abdata\studio\list\itemlist\honey
00.unity3d, 01.uni-ty3d, 02.uni-ty3d, 03.uni-ty3d

Because HiR integrates 01-03.unity3d with 00.unity3d, the 01-03.unity3d becomes unusable.
However, the 01-03.unity3d comes to be usable again if install append disc or DLC,
and the conflict with the 00.unity3d happens.
Various malfunction happens in a studio.
Please execute HiR again if it happen.

 

[smoothlaunch]

I have a simple question about HIR.
Sometimes items comes with japanese names & text .
How can I change the display names of them after installation of files for Studio Classic and Studio Neo "?
Where are their names ..? Which files I should edit with SB3UGS ?

 

[cur144]

@smoothlaunch
It must change the following red part by text editor.

1.In the case of the files under the abdata\studio\itemobj\honey\HoneyselectItemResolver

<><><8001><1><[ドーム]快晴><studio/itemobj/honey/_yashiroAmamiya_dome1.unity3d><p_item_04>

Then reflect it to old studio by HiR and reflect it to studio neo by HiR_Neo.


2.In the case of the files under the abdata\studioneo\HoneyselectItemResolver

<19002><7><フードマント(色変え可能)><add15><chara/ca_back_15.unity3d><p_acs_mant1_robe1><><False><True><o_robe_hood_1/o_robe_mant_1/o_robe_mant_u1><True><o_robe_hood_1/o_robe_mant_1/o_robe_mant_u1><True>

Then reflect it to studio neo by HiR_Neo.

 

[smoothlaunch]

Oh i know this cur144..
But i ask if it is possible to edit unity files after running HIR while all files already had been added to unity list.
Before i saw there is an excel like list in an unity file. But after Studio neo i lost them ..
I want to edit the japanese names in unity list files but which are the files ? Is it possible to do this... ?

 

[cur144]

It is overwritten from the contents of the text even if you edited unity file when execute HiR.